78K0/Fx2 – CAN it!
(b) Advance
setup
The Advance setup menu is used to specify the command options and security flag
settings.
When "Advance" is clicked, the following window is displayed:
Figure 47: Device Setup Window - Advance
<1> Command options
This dialog box is used to specify the FPL3 flash processing command options.
Figure 48: Device Setup Window - Command options
[Blank check before Erase check box]
If this check box is checked, blank check is made before the Erase command or EPV
command is executed.
If the result of a blank check indicates OK, erase processing is not executed.
[Read verify after Program check box]
If this check box is checked, write data is sent from the programmer after execution
of the Program command and EPV command, then the data is verified against the
data written to the flash memory.
[Security flag after Program check box]
If this check box is checked, automatic programming of the selected security flag is
executed after execution of the [Program] and [Autoprocedure (EPV)] commands.
54
Содержание 78K0/Fx2
Страница 80: ...78K0 Fx2 CAN it 15 USB interface cable Mini B type Figure 77 USB interface cable Mini B type 80 ...
Страница 81: ...78K0 Fx2 CAN it 16 Schematics Figure 78 78K0 Fx2 CAN it baseboard schematics 81 ...
Страница 82: ...78K0 Fx2 CAN it Figure 79 78K0 Fx2 CAN it CPU module schematics 82 ...
Страница 83: ...78K0 Fx2 CAN it MEMO 83 ...
