NEC 1232 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 86

background image

Intercom Outgoing Call

34

1. Lift handset or press at a phone that received the

page.

2. Press key.
3. Dial announced code.

- 80-87, or 88(same zone)

1. Lift handset at a phone that received the page.
2. Dial 08 or 98.
3. Dial announced code.

- 80-87, or 88(same zone)

1. Lift handset.
2. Dial code 81-84 for zones 1-4; 80 for All Call.
3. Page person, announce that pressing key will join

Meet-Me Conference.

4. Press key for Meet-Me Conference.
5. Do not hang up. Wait for a reply.

1. Lift handset or press at a phone that received the

page.

2. Press key.
3. Press key for Meet-Me Conference.

Flexible Station Numbering

Two or three-digit extension numbers are flexibly assigned within a specific range to each telephone port by
system programming. Originally, extension numbers match telephone port numbers.

System

Port

Available Extension

Numbers (2 digit)

Available Extension

Numbers (3 digit)

10-73

10-79

100-799

Dual Handsfree Hotline

Dual Handsfree Hotline allows one extension to simultaneously call two other extensions. The "secretary"
extension can make a voice announced Intercom call over the speaker of both "executive" extensions. The
users at the executive extensions can reply Handsfree (i.e., by just speaking toward the phone) and all three
parties can converse. The simultaneous call goes through only if both executive extensions are idle and an
executive extension has not forwarded Intercom calls. In order to reply Handsfree, the microphone at an
executive extension must be on. When an executive replies by lifting the handset, the other executive is
disconnected. The secretary can make a ringing Intercom call to both executives; however, an executive must
lift the handset to reply, which disconnects the other executive.

1. Lift handset at secretary extension.
2.

Dial either executive extension number. Both are called.

- If ringing is heard, the secretary can dial 1 to convert

the call into a voice announced call.

- If busy tone is heard, the secretary can still contact the

other executive by dialing the other executive extension
number after pressing ICM key.

To reply to Meet-Me Answer:

To initiate Meet-Me Conference:

To reply to Meet-Me

Conference:

SPK

DND/CONF

DND/CONF

SPK

DND/CONF

ICM

ICM

«
...
38
39
40
41
42
...
»

Содержание 1232























































































Отзывы:

Нет отзывов

Похожие инструкции для 1232

Бренд: Magnavox Страницы: 26

Бренд: Aastra Страницы: 16

Бренд: Samsung Страницы: 32

Бренд: Daewoo Страницы: 32

Бренд: Yealink Страницы: 4

Бренд: Talkswitch Страницы: 334

Бренд: Qtx Страницы: 6

Бренд: GE Страницы: 62

OfficeServ 7400

Бренд: Samsung Страницы: 20

CRUISER2 HSF002

Бренд: Jabra Страницы: 2

Sportsound SSR-300

Бренд: Daktronics Страницы: 6

Бренд: Binatone Страницы: 36

Бренд: AUDIOLINE Страницы: 48

Бренд: ION Страницы: 48

Бренд: Bogen Страницы: 2

Бренд: Ipevo Страницы: 4

WIreless Microphone and Controller

Бренд: SEON Страницы: 3

Бренд: Depaepe Telecom Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды