Nebula Capsule, Руководство пользователя

Страница: 6 / 13

EN EN
08
09
Get Started
1. Placement
Place this device on a stable, flat table in front of the
projection surface. For best results, the projection
surface shall be white and flat. The distance between
this device and the projection surface must be a
minimum of 0.58 meters (23”) and a maximum of 3.08
meters (121”) to get a projection image from 20 to
100 inches.
23”
0.58m
3.08m
121”
T
• It is unnecessary to tilt it towards the projection
surface. You can correct the projection image
with the built-in keystone correction.
• The distance between the device and the
projection surface determines the projection
image size. For the best result, set the
projection image ranging from 40 to 80 inches.
2. Prepare the Remote Control
①
For the first time use, remove the protective tab to
activate the remote control battery.
②
To replace battery, unlock to open the battery
compartment, insert a new battery with correct polarity
(+/-) as indicated, and then close and lock the battery
compartment.
3. Get Started
①
Fully charge the built-in battery before using for the
first time by using the provided cable and charger.
②
Long press for 2 seconds on the projector to power on.
③
Turn the device towards a suitable projection surface
or wall.
④
Rotate the focus adjusting knob to get the best
focus.
⑤ For the first time use, follow the on-screen instructions
to complete the basic settings.
T
To give your Nebula Capsule the fastest, safest
recharge, use the supplied charger only.