Neat WALL Famiy, Техническое руководство

Страница: 48 / 56

neat
48
NE41 11014-02 v4.1 WALL - Technical Handbook
Action settings
Three actions must be defined and when done it should look like below.
Picture 51. PUSH Actions settings.
Action #1 settings
Set Action #1 to the following:
Item Selected value
Alarm type No transmission
Relay 1 action Pulse close, override if ongoing pulse
Relay 2 action Pulse close, override if ongoing pulse
Table 16. Settings for Action #1.
Result: No radio transmission will occur and Relay 1 and 2 will pulse close and
override any ongoing pulse.
Action #2 settings
Set action #2 to the following:
Item Selected value
Alarm type No transmission
Relay 1 action No action
Relay 2 action Pulse close, always override ongoing pulse
Table 17. Settings for Action #2.
Result: No radio transmission will occur, while there is no action on Relay 1 and Relay
2 will pulse close and override any ongoing pulse.
Action #3 settings
Set action #3 to the following:
Item Selected value
Alarm type No transmission
Relay 1 action Pulse close, always override ongoing pulse
Relay 2 action No action
Table 18. Settings for Action #3.
Result: No radio transmission will occur, while there is no action on Relay 2 and Relay
1 will pulse close and override any ongoing pulse.