INKA, IOR, REPO & LINK
3 Event Handling
3.1 Radio Reception: IOR, REPO and LINK
IOR, REPO and LINK can receive radio messages sent from alarm transmitters such as ATOM or
INKA, or from home care phone NEO or portable transceivers TREX and HOME. The radio messages
are normally alarms, but can also be of other types.
Note that if IOR is configured to be in
power save mode
, it can not receive any radio messages when
running on the backup battery only, see section 3.5 of this manual.
3.1.1 Radio Codes
All radio messages contain an
ID code
identifying the transmitter that sent the message. The ID code
in a radio message is also referred to as the
radio code
of the radio message. If the radio message is
intended for one specific receiver, the
fixed input
ID code of the receiver is sent instead of the ID code
of the transmitter.
3.1.2 Connecting Alarm Transmitters to IOR, REPO and LINK
There are 8 radio positions in IOR, REPO and LINK. In each position, one transmitter ID code can be
programmed. When the ID code of a received radio message matches the ID code of one of the 8
radio positions, then the relay action and radio transmission configured for that position will be
performed.
ID codes for incoming radio messages are programmed in the text boxes for
radio code
,
position 1-8
under the
radio input
tab in IOR Programmer.
IOR
REPO
LINK
Program a transmitter ID in position
1…8
Click button 111…118 and then activate the
transmitter, or enter the ID code in text box
101…108.
Technical Handbook for the IOR Family (firmware v20.x), document number NE41 06007-02 v1.0
20
Содержание INKA
Страница 1: ...7 IOR Family Technical Handbook ...
