
D-POS II - NE41 17028-00 v1.0
8
Engli
sh
3.8 Antenna range adjustment
The antenna range can be tuned by adjusting the antenna power
field. This is done by setting DIP7 to
On
(high power) or
OFF
(low
power) in combination with the potentiometer
P1
where clockwise
rotation increases field power.
On
Off
Power
Low
High
P1
P1
DIP7
Picture 3. Antenna power adjustment with DIP7 and potentiometer P1
3.9 Managing transmitters
D-POS II can work as a radio receiver. Adding radio transmitters is
done by using button
B1
.
3.9.1 Program a radio transmitter id code
1. Press the button
B1
2. After 3 seconds the LED starts flashing red (150ms on/400ms off)
every 2 seconds according to below where the number of
flashes corresponds to a radio position, e.g. 3 flashes equals
radio position 3:
1 flash - 2 flash - 3 flash - 4 flash - 5 flash - 6 flash - 7 flash - 8 flash -
1 flash - …
3. Release the button
B1
at the desired radio position.
4. Activate the radio transmitter.
5. If the radio code is successfully received, D-POS II flashes green
rapidly for 2 seconds whereafter the unit returns to normal mode.
3.9.2 Erase a radio transmitter Id code
Follow steps 1-3 in 3.9.1 above.
After releasing the button
B1
at the desired radio position, press
button
B1
for more than 3 seconds. The deletion is indicated by the
LED flashing green rapidly for 2 seconds whereafter the unit returns
to normal mode.