
4
Speaker Installation
Suspension Cable Assembly
1
. Screw nuts onto the three (3) eyebolts all the
way to the flange.
2. Screw in eyebolts with captured cable
sections into the three (3) suspension points.
Do not overtighten.
3. Snap the loops of the three (3) free ends of
the cable sections into the quick-snap clip.
4. Connect the quick-snap clip to the drop cable
loop (not included).
Safety Cable (not included)
The speaker includes a safety cable suspension
point for extra protection. Refer to instructions
with cable kits for proper use.
Accessory
CK
1
0 (Cable Kit,
1
0')
The CK
1
0 is a
1
0-foot cable with one looped end, a forged eyebolt (with
1
/4-20" x
1
/2" thread), and an adjustable cable clamp. It is suitable for use as a drop cable or
safety cable.The CK
1
0 is available in black, white, or silver.
IMPORTANT
The anchor point and any hardware used
to anchor the speaker must be able to
support the speaker’s weight under all
conditions. IF YOU ARE NOT SURE OF
THE PROPER CAPACITY OF THESE
ITEMS TO USE, CONSULT A STRUCTUR-
AL ENGINEER. Mount only one speaker
per supplied quick-snap clip.
1.
2.
3.
4.
54-2090-01B.qxp 6/18/2004 10:33 AM Page 6