3
Speaker Wiring
Wiring is terminated at a snap-lock input
connector. There are two positive and two
negative terminals to accommodate daisy-
chaining of speakers in a system. All wiring
should be done prior to installation and then
plugged into the rear of the OPS
1
.
Daisy-Chaining
The OPS
1
’s snap-lock input connector allows
for easy daisy-chaining of speakers by providing
a second terminal of each polarity. Refer to the
figures for proper wiring for daisy-chaining of
terminals.
Speaker Phasing
Keep the same polarity terminals wired together to ensure correct phasing. In order
to provide the best possible sound, all of the speakers in a system need to be push-
ing out and pulling in at the same time.
If the connections to one speaker in a system are reversed from the others, that
speaker’s movement will be out of sync with the other speakers.This will result in a
loss of low frequency response and will effect the overall performance of the
system.
54-2090-01B.qxp 6/18/2004 10:33 AM Page 5