NEAR 6XL Скачать руководство пользователя страница 2

CAUTION: TO PREVENT THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED PERSONNEL.

The lightning flash with arrow-
head symbol, within an equilater-
al triangle, is intended to alert the
user to the presence of uninsu-
lated “dangerous voltage” within
the product’s enclosure that may
be of sufficient magnitude to con-
stitute a risk of electric shock to
persons.

The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and mainte-
nance (servicing) instructions in
the literature accompanying the
appliance.

Every effort was made to ensure that the information in this
guide was complete and accurate at the time of printing.
However, information is subject to change.

WARNING:

To Reduce The Risk of Fire Or Electric Shock,

Do Not Expose This Apparatus To Rain Or Moisture.

Always follow these basic safety precautions when
installing and using the unit:

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

DO NOT use this apparatus near water. The apparatus
shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be
placed on the apparatus.

6.  Clean only with dry cloth.

7.

DO NOT block any ventilation openings. Install in 
accordance with the manufacturer’s instructions.

8.

DO NOT install near any heat sources such as radia-
tors, heat registers, stoves, or other apparatus (includ-
ing amplifiers) that produce heat.

9.

DO NOT defeat the safety purpose of the polarized or
grounding-type plug.  A polarized plug has two blades
with one wider than the other.  A grounding-type plug
has two blades and a third grounding prong. The wide
blade, or the third prong, are provided for your safety.
If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched, particularly at plugs, convenience recepta-
cles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Unplug this apparatus during lightning storms or when

unused for long periods of time.

13. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normal-
ly, or has been dropped.

NOTICE

IMPORTANT

IMPORTANT SAFETY INFORMATION

Содержание 6XL

















Отзывы: