NDT
INTERNATIONAL, INC.
NDT-710
Thickness
Gauge
6
Specifications:
The NDT-710 Ultrasonic Thickness Gauge is a Pulse/Echo type ultrasonic instrument that
uses a hand held dual element transducer to measure the thickness of metallic and nonmetallic
materials.
Measurement Range: 0.030 to 19.999 inches in carbon steel. This is dependent upon
the transducer used and the material measured. The standard kit
transducer will read to a minimum of 0.040"
Resolution:
± 0.001" (± 0.01 mm) up to 1.000 inches (25.3 mm)
± 1% from 1.000 to 19.999 inches
Velocity:
0.0197 to 0.3936
in/
µ second
(500 to 10,000
m/s
)
V-Path Correction:
The microprocessor automatically adjusts for linearity
Display:
4 ½ digit LCD display
Backlit Display:
Set to "AU" - will light when transducer is coupled to material,
and will to shut off automatically after 10 seconds of non use.
Set to "ON" - backlight will come on when gauge is turned on
and remain on until gauge shuts off.
Set to "OFF" - backlight will remain off.
Temperature Range: +10 to +120F (-10 to +50C)
Size:
1.4" H. x 3.1" W. x 5.7" L.
Weight:
11 ounces
Features:
Automatic Zero adjust circuit for fast calibration
Automatic shut-Off 2 minutes last measurement or key pressed
Retains the last reading in memory
Battery life is approximately 75 hours continuous use from one 9 volt alkaline battery
with backlight turned OFF
Low battery level indicator in display
Coupling indicator
The
backlit display liquid crystal display (LCD) gives easy-to-see thickness
readings in most lighting conditions
Keypad has built-in 0.250" thick calibration block
The standard kit includes the NDT-710 gauge, a 0.25" element diameter (.41" contact
face diameter) x 5.0 MHz dual element transducer with comfort grip housing on 4-foot
long top-exiting cable with LEMO #00 plug connectors, a 4 oz. bottle of top quality
ultrasonic couplant, operation manual and a padded accessory bag.
