NDT
INTERNATIONAL, INC.
NDT-710
Thickness
Gauge
13
Equipment Warranty
1. Electronic instrumentation manufactured by NDT International Inc. is warranted to be free
from defects in workmanship and material under normal use and service for a period of
one year from the date of shipment unless otherwise specified.
2. Instrumentation purchased from outside sources, to meet customer's special requirements,
is guaranteed by the original manufacturer's warranty only.
3. Ultrasonic transducers and angle beam wedges (shoes) are not covered by the standard
equipment warranty. Transducers are considered an expendable item, can be easily
damaged through misuse or exposure to extreme temperatures and can be worn out
through use on excessively rough surfaces. If transducers experience failure within the
first thirty days, and have not been exposed to excessive use, replacement will be
considered after examination by NDT International.
4. Warranty repairs are accomplished by NDT International or our authorized representative.
5. Goods or parts that are defective in workmanship and/or material will be repaired or replaced
free of charge, FOB authorized repair station, provided that the goods or parts are
returned, transportation charges prepaid, within the specified warranty period.
6. Materials returned for warranty repairs must have prior authorization. Obtain a Return
Material Authorization (RMA) number from NDT International or our authorized
representative prior to shipment. The RMA number must be used on all correspondence
and packing lists.
7. Ship prepaid to the address below, ATTN: Quality Assurance Mgr. - Repairs
8. Warranty repairs include all parts and labor. The cost of any travel and/or subsistence to
accomplish on-site warranty repairs, if requested by purchaser, is not a warranty item
and will be charged to the purchaser in accordance with normal company procedure.
9. The cost of repairing goods damaged during shipment is not covered by this warranty
unless specific allowances are made prior to shipment.
For service, repairs or calibration contact NDT at the following address:
NDT
INTERNATIONAL, INC.
711 S. Creek Road
West Chester, PA 19382-8013 U.S.A.
Phone: (610) 793-1700 FAX: (610) 793-1702
E-Mail: [email protected]
