NDT Systems Bondascope 350, Руководство оператора

Страница: 6 / 31

Bondascope 350 Operator's Manual
2
2 AREAS OF APPLICATION
The BondaScope 350 inspects a wide range of Bonded on metals, plastics, ceramics, glass or virtually any other
material which will satisfactorily conduct ultrasound, and has fairly parallel (or concentric) surfaces. The actual range is
material and application dependent.
The durable custom extruded, design allows the unit to withstand the rigors of heavier industrial environments.
The All New BondaScope Series defines a new standard in ease of use, performance, features and portability in a
Portable, Handheld Bond Tester. The ALL NEW BondaScope 350 operates in Continuous Wave, Tone Burst or Pulsed
mode (depending on user application & probe selected) as well as Pulsed Pitch-Catch mode with Pulse Rates up to
300 Hz. Display Updates of 40+Hz. With the introduction of NEW, industry leading features including SplitView and
SplitScan the BondaScope 350 presents the best indication and presentation of potential bond problems available
today. NDT Systems, Inc. is unique in offering, for the first time in industry, the ability to scan a surface and map a
Bond Profile in real time! This mode can be significantly easier to interpret for users of all levels. Other,
SIGNIFICANTLY more expensive units may offer to store a TOTAL of a mere 20 waveforms; the BondaScope can
store over 250 full scan sets!!
The concept of Scanning and presenting historic information on screen, in real time, allows the operator to assess the
pattern over distance and/or time, thereby developing a trend pattern. This information can provide the operator with a
higher level of confidence.
Setup is as simple as setting a probe over a good area and pressing NULL, then go over a bad area, set gain and/or
alarm level threshold.
The high speed (120Hz refresh rate), sunlight readable display offers a full Quarter VGA resolution. The resolution of
the display will appear to approach analog! User interface is via simple plain text menus located at the bottom of the
display.
Examples subjects of evaluation:
Airframes/Aircraft Skins
Bulkheads
Crushed Core
Fiberglass
Adhesive Joints
Cardboard
Skin to Honeycomb
Skin to Skin Composite to Aluminum Honeycomb
Multi-Layer Aluminum Laminates
.... And More