NDS SMARTCHARGER SCM25, Руководство пользователя

Страница: 6 / 20

3. main features
•
Plug and play.
•
OPTICHARGE the new firmware algorithm to check
the battery status and optimize the charge.
•
Specific Charging curve Ideal for every battery
technology, lithium batteries included.
•
Up to 9 charging steps.
•
IP20 protection.
4.Preliminary process
1. Remove battery from vehicle (if necessary).
2. Clean the terminals.
3. In case of lead acid Wet battery Add distilled water
in each cell until battery acid reaches level specified
by battery manufacturer. Do not overfill!
4. Before to start, always remove grounded connection
from battery and Make sure all the appliances in the
vehicle are off.
5. Be sure that the area around battery is well
ventilated while battery is charging.
4
CAUTION
To charge an engine battery
directly inside the vehicle
connect the negative clamp
to the vehicle chassis (usually
connected to the battery
negative pole), then the
positive clamp to the battery
positive pole.
POSITIVE
CLAMP ON THE
BATTERY POLE
NEGATIVE
CLAMP ON
THE CHASSIS
+
-