To avoid interferences in audio / video systems:
• Use high quality (and in good condition) cables for
TV antennas and other transceivers.
• make sure that the
POWER
SERVICE’S
power
cables (input and output) are far from transceivers
cables, sensitive devices power cables and
AC
current cables.
• Place sensitive equipment as far as possible from
the
POWER
SERVICE
.
18
NOTE
•
The data connector placed on the right of the power
connector is for technical use
.
it is strictly forbidden to
connect any device in this socket, any tampering could
irreparably damage the appliance.
•
Use cables with a cross-section of at least 10mm
2
for:
connections between engine battery and Power
Service, and in the output towards the leisure battery. if
the distance between the motor battery and the device
exceeds 2 meters, it’s recommended to increase the
cable section, to reduce voltage drop and power losses
.
