Nds surgical imaging Zero Wire Duo, Руководство пользователя

Страница: 16 / 36

9
Performance
Tx Indication:
1. When all channels are in use and a new ZeroWire pair or a new Tx is turned on: The LED on the Tx will
alternate between blue and yellow continuously or until it finds a free channel. If a free channel is
found, then the LED will behave as described in
Bonding Procedure on page 8.
2. When all channels are in use and the bonding button is pressed on a new Tx: The LED on the Tx blinks
fast yellow, indicating that the device is attempting to bond. If no channel is found, then the LED blinks
alternately between blue and yellow until the bonding times out. If an available channel is found, then
the LED will behave as described in
Bonding Procedure on page 8.
Rx Indication:
Rx is not aware that all channels are in use.
All Channels In Use Indication
Transmitter Receiver
Display hardwired to
image source (processor).
NDSsi recommends ZeroWire for primary and secondary displays. However, for patient safety
a display that is cable connected to the video source shall be immediately available whenever
a surgical procedure is in progress.
Typical Installation
Detailed Installation and Setup information starts on the following page.
Performance:
ZeroWire HD Wireless Video System products are intended and optimized for use in a surgical operating
room (OR). Use outside of an OR environment is not recommended.
The following steps will help you to achieve optimal performance of the ZeroWire system:
1. Mount both components at least 5 feet (1.5 m) from the floor.
2. Ideally, both the transmitter and receiver should be at the same height.
3. For a reliable video link, the distance between transmitter and receiver should be 30 feet (10 m) or less .
4. The black surfaces of the transmitter and receiver should be vertical, facing each other and be visible to
each other in free air space. We do not recommend orienting the modules horizontally.
5. For non line of sight applications, we recommend that the Tx and Rx be located no more than 6 feet
(1.8 m) from the walls of the OR.