![NDrive Binatone U435 Скачать руководство пользователя страница 8](http://html.mh-extra.com/html/ndrive/binatone-u435/binatone-u435_user-manual_715017008.webp)
QUICK START GUIDE
Additional Maps and Upgrades
–
Please visit
Technical Help
–
Please contact the helpline on 0844 557 9677
8
Charging the Battery
Before using your GPS device for the first time, we recommend that you charge the
unit for 5 hours via a USB cable or the car charger supplied, or until the charge light
turns green.
Plug the USB cable/car charger into the
USB socket.
NOTE:
Charging via USB cable. It is possible to charge the unit via a USB cable but
the charge time will be significantly increased. Also if the battery is very low the unit
will not fully charge.
The charging indicator on the unit will light up red. When fully charged the red light
will turn green.
When using the GPS device in your car, we recommend that you always use the car
charger in order to maintain the battery level.
NOTE:
The unit is not designed to be run on battery power alone, the battery is there
for back up purposes only
Installing a Micro SD Card
You may install it as described below.
Switch the unit off first before installing or removing the MicroSD card.
When installing it can only be fitted one way
–
the contacts should be facing away
from you and the cut-off corner at the bottom (as shown above). Slide the card in
and push it in so that it clicks into place.
Once the card is installed it does not need to be removed.
If you need to remove the card, push the card in and it will eject from the slot.
Car Adapter
When using your GPS in the car we recommend that you always use the in-car
charger to power the unit.
Plug the in-car charger into the USB socket of the unit. Plug the other end of the
adapter into the car’s cigarette
-lighter / 12V DC socket.
The adaptor is also compatible with 24V DC sources, as found in many heavy goods
vehicles.