background image

© Pro Advantage by NDC.  All rights reserved 

PS-733 Rev 00-3/10 

 

 

 

22/23 

 

Appendix 4: Warranty

 

 
 

Limited Manufacturer’s Warrantee 

 

PRO ADVANTAGE URINE ANALYZER URINE REAGENT READER 

 

Terms and Conditions 

The manufacturer warrants to the original purchaser that this instrument will be free from defects in materials and 
workmanship for a period of 365 days (1 year) from the date of original purchase or installation (except as noted below). 
During the stated 365-day period, The manufacturer shall replace with a reconditioned unit or, at its option, repair at no 
charge a unit that is found to be defective. The manufacturer shall not be responsible for shipping charges incurred in the 
repair of such instrument.  

 

This Warranty is subject to the following exceptions and limitations: 

This warranty is limited to repair or replacement due to defects in parts or workmanship. Parts required which were not 
defective shall be replaced at additional cost, and the manufacturer shall not be required to make any repairs or replace 
any parts that are necessitated by abuse, accidents, alteration, misuse, neglect, maintenance by anyone other than the 
manufacturer, or failure to operate the instrument in accordance with instructions. Further, the manufacturer assumes no 
liability from malfunction or damage to the manufacturer instruments caused by the use of reagents other than reagents 
manufactured or recommended by the manufacturer. The manufacturer reserves the right to make changes in design of 
this instrument without obligation to incorporate such changes into previously manufactured instruments. 

 

Disclaimer of Warranties 

This warranty is expressly made in lieu of any and all other warranties express or implied (either in fact or by operation of 
law) including the warranties of merchantability and fitness for use, which are expressly excluded, and is the only warranty 
given by the manufacturer.  

 

Limitations of Liability 

In no event shall the manufacturer be liable for indirect, special or consequential damages, even if the manufacturer has 
been advised of the possibility of such damages. For warranty service, purchaser must contact the Customer Service 
Department or your local authorized distributor. 

 
 
 
 

 

 
 
 

Содержание Pro Advantage
























Отзывы: