NDC BenchMike Pro, Инструкция по эксплуатации, Страница: 82 / 146

4-30 BenchMike Pro 2025/2050 & Z-Mike Pro 4025/4050 Instruction Handbook: Setup
4.10.3 Measurement Type
Eighteen measurement types are available. Options include
simple diameter measurement, measurements of multiple
parts, or measurements of transparent products. All available
measurement types are shown below.
Each time the laser beam passes over the product, the BenchMike Pro records the product size as a scan. For
greater accuracy, the BenchMike Pro groups these scans together to compute a reading. Each measurement
reading is displayed on the BenchMike Pro’s screen.
You specify how to compute and display the readings through three Measurement Setup tabs. Measurement set-
tings can be accessed through the Measurement Type, Averaging, and Custom tabs. Note that on the Type tab
only, the Measurement Type can be changed when an Intelligent Fixture is used.
Name Description
Diameter Diameter of product
Type 1 Diameter of lower product (2 products in beam)
Type 2 Distance between 2 products
Type 3 Diameter of upper product (2 products in beam)
Type 4 Distance from lower edge, lower product to lower edge, upper product
Type 5 Distance from upper edge, upper product to upper edge, lower product
Type 6 Distance from upper edge, upper product to lower edge, lower product
Type 7 Distance between lower edge of product and lower reference edge
Type 8 Distance between upper edge of product and upper reference edge