NcTech ISTAR, Быстрый старт

Страница: 3 / 9

1. Ensure the camera has power via mains or charged battery installed
2. Turn the camera on by sliding the on/off switch (fig 1.)
3. Position the camera so that the NCTech logo is pointing towards you
4. To start the camera, tap the four corners of the screen in the order of 1 to 4 (fig 2.)
5. An audible beep will be heard
6. The iSTAR logo will appear on screen for 15 seconds (approx) as the camera boots up
7. The iSTAR menu will appear and the camera is now ready for operation
03 / TURNING ON THE CAMERA 04 / MAIN MENU
Ethernet cable attached GPS indicator
USB indicator
Wifi strength
Image
capture &
live view
GPS & Tilt settings Image review Settings
SD card capacity remaining
SD card inserted Battery level
Power off
1. Switch on by sliding
from left to right
2. Tap the four corners in
order shown below