MSL-200
CNC LATHE
MAINTENANCE MANUAL
NCT Ipari Elektronikai Kft.
19 / 32
10 September 2018
H-1148 Budapest, Fogarasi út 7.
Phone: +36 1 467 6300
www.nct.hu
3
MACHINE HANDLING AND INSTALLATION
3.1
Handling method
3.1.1
Handling of machine in crate
Using a forklift to handle a machine packed in crate
1.
When using forklift to handle a ma-
chine, the safety loading capacity of
forklift need to bigger than weight of
machine with packing to avoid any is-
sue. (Please refer 2.2 specification table
for machine weight)
2.
During handling, be mindful of any per-
sonnel or obstacles in the path of traffic.
In case there are personnel and obsta-
cles, first evacuate the personnel and
remove obstacles to avoid impact and
ensure safety of personnel and the ma-
chine.
3.
In case a forklift is used, the forks
should be adjusted to their proper posi-
tions. Make sure the centre of gravity of
crated machine should be at the loading
centre of the forklift, to avoid tilting and
accident.
4.
When the forklift lifts up the crated machine, watch the lifted height. Do not lift it too
high or it may swing due to too high a centre of gravity and result in an accident.
5.
In case vision is obstructed when handling the crated machine, recommended movement
is to reverse the forklift. There should be a co-worker on the side to give instructions and
ensure safety. The driving speed of the forklift should be as slow as possible.
3.1.2
Handling of machine without a crate
Using a forklift to handle a machine without a crate
1.
When using forklift to handle a machine, the safety loading capacity of forklift need to
bigger than weight of machine with packing to avoid any issue. (Please refer 2.2 specifi-
cation table for machine weight.)
2.
During handling, be mindful of any personnel or obstacle in the path of traffic. In case
there are personnel and obstacles, evacuate the personnel and remove the obstacles to
avoid impact and ensure safety of personnel and the machine.
3.
In case a forklift is used to handle, the forks should be adjusted to their proper positions.
Make sure the centre of gravity of crated machine should be at the loading centre of
the forklift, to avoid tilting and accident.
4.
When the forks lift up the machine, make sure of the lifted height. Do not lift it too high,
or it may swing due to too high a centre of gravity, and result in an accident.
