16
Site Preparation
Electrical Requirements
Power is supplied to the display either from an external power supply or through a
Powered USB interface. In either case, the nominal input voltage shall be +12 volts and
conform to the following.
Parameter
Minimum
Typical
Maximum
Input V10.8 V
+12.0 V
+13.2 V
Power Consumption
Display
Typical
Standby
No Touch
5.70 W
2.18 W
Resistive
5.89 W
2.57 W
PCAP
5.84 W
2.33 W
AC Store Wiring Requirements
The customer must provide suitable AC power for the terminals, associated equipment,
and devices. We recommend a dedicated unswitched power line dedicated to the NCR
equipment installation. Refer to the
NCR Workstation and Peripherals AC Wiring Guide
(BSTO-2115-53) for store AC wiring requirements. The AC outlet must be installed near
the terminal and easily accessible to the operator.
Содержание XL15
