NCR Orderman Base Station4 User Manual V01.10
Installation of the NCR Orderman Base Station4
Orderman GmbH (Part of NCR Corporation) 11
3.1.4
Uninstalling/installing the mounting plate
3.1.4.1 Uninstalling the mounting plate
To remove the mounting plate from the housing, release the two retaining clips by pressing
them away from the housing.
The mounting plate is released by pressing the retaining clips.
Fig. 8: Removing the housing from the mounting plate
Housing
Retaining clips
3.1.4.2 Installing the mounting plate
Place the housing above the mounting plate. The retaining clips should stick through the
housing.
By lightly pressing on the housing, the retaining clips snap into place (
clicking sound
). Check
whether the housing has latched properly into place on both sides by lightly pressing the
retaining clips.
Fig. 9: Placing the housing on the mounting plate
housing
Retaining clips
