Document Number
DCV-00202
Date Released
Oct. 2016
Revision Number/Security level
R01 S2
Retrofit G6+InvencoLink GVR Advantage (US) Installation Guide
and tighten it using a large Philips screwdriver:
Fig. 2.3
– Installing Latch and Set Screw
e. Check that the lock operates properly. The key should turn clockwise to unlock, and the
Latch tab should be downward when unlocked:
Fig. 2.4
– “Unlocked” position (key vertical, Latch downward)
4.2.2 Replace the Gasket on the Pump Door
When the CRIND Option Door is replaced with the NCR/Invenco RFK Door, a new gasket is required on
the plastic Advantage Pump Door panel to achieve a weather tight seal. In some Advantage models there
is an existing gasket at the top of the Pump Door opening. If present, this gasket needs to be removed
first.
1. If there is no original gasket present, go to step 4.
2. Remove the existing gasket from the Pump Door panel:
