NCR 7890, Руководство пользователя

Страница: 90 / 217

Programming Your 7890 Scanner
Good Read Tone
User’s Guide 5-15
Enter Specific Parameters
1 In the Base Programming state, scan the Hex 1 tag
two times.
2 Scan the shortcut Hex tag (Hex A, Hex B, or Hex
C
) for the parameter you are changing.
Which tag did you scan?
Hex A
Continue to step 3.
➝➝
Hex B
Continue to step 4.
➝➝
Hex C
Continue to step 5.
➝➝
3
Scan the Hex 0 tag to turn off the Good Read Tone
or the Hex 1 tag to turn on the Good Read Tone.
End of this procedure - program returns to Base
Programming state (long then short beep).
■
4 Set the Tone Frequency by scanning the appropriate
Hex tag or by repeatedly scanning the Hex A tag
until you hear the desired tone. If you used the Hex
A
tag, scan the END tag.
End of this procedure - program returns to Base
Programming state (long then short beep).
■