NCR 7800, Руководство пользователя, Страница: 69 / 112

/DEHO,GHQWLILHUV
8VHUV*XLGH
Selects the common bytes to add to the bar-code data
message if any are necessary. Each entry is unique to the
previously specified Bar-Code Type. Scan the Hex 0 tag for
no Common Bytes, Hex 1 tag for Common Byte 1, Hex 2 tag
for Common Byte 2, or Hex 3 tag for Both Common Bytes.
The default for this parameter uses Common Byte 2 as a
suffix for Code 128, and Interleaved 2 of 5 bar code data.
UPC and EAN bar codes do not use Common Bytes.
Permits you to specify the data sent to the host terminal or PC
in the Unique Identifier field. Each entry is unique to the
previously specified Bar-Code Type. Input this information as
two Hex characters for each Common Byte and use Hex
values from 20 to 7E (refer to the ASCII Code Chart in
Appendix A). Do not use the same characters as the
Terminator Byte because the message will terminate too soon.
The following table shows the default values.
+H[7DJ %DU&RGH7\SH +H[ $6&,,
0 UPC-A 41 A
1 UPC-D 44 D
2 UPC-E 45 E
3 EAN-8 46 F
4 EAN-13 47 G
5 Code 39 31 1
6 Code 128 33 3
7 Interleaved 2 of 5 32 2
Common Byte
Unique Identifier