7705 R1.1 EBOx
1-11
6. Connect the Fascia Harness Cables to the Ebox and DC Hub.
a. Plug the DVD-RW cable to the eSATA connector on the side of the EBox.
b. Plug the following DC cables to the Mini DC hub on the side of the EBox:
•
Touchscreen
•
EBox
•
Mini DC Hub cable from top box
c. Plug the cables in the table below to the EBox I/O Panel:
Note:
Some device cables may not be present depending on the Kiosk configuration.
EBOX I/O Panel
Cable
USB 3.0 Ports
19-inch Touchscreen
USB Mini Hub (from top Box USB Mini Hub)
LAN
LAN
RS 232 (COM 1)
Note Acceptor
USB 1
PIN Pads (IPP350, VX805/820) or UX300 MSR
USB 2
Barcode Scanner
USB 3
USB Camera Digitizer
USB 4
Trackball and Switch
Audio Out
Line Out (from MIDI MISC IF)
DC Power
DC distribution (from EBox Mini DC hub)
