10
RealPOS 82XRT Integration Tray Kit Instructions
2. Slide the Electronics Sled into the cabinet. Do not tighten the thumbscrews so the
sled can be pulled out for service.
Caution:
Remember to tighten the thumbscrew before moving the terminal to
another location to prevent the sled from falling out.
31266
3. Replace the Bezel.
a. Turn the Keylock to the unlocked position.
b. Insert the hooks on the bottom edge of the Bezel in the slots in the chassis.
c. Pivot the top of the Bezel into the chassis until it snap into position.
31283
d. Turn the Keylock to the locked position.
