NCR 7455, Руководство пользователя по оборудованию

Страница: 118 / 144

4-4 Chapter 4: Operating System Recovery
Completing the OS Installation (Windows NT)
The system automatically reboots when the image recovery is complete
and starts the software installation. This installation also installs most
of the additional software and drivers that are included in the disk
image. Complete the installation as follows.
1. After the terminal reboots, press Next at the Windows Setup screen.
2. Accept the Microsoft license agreement.
3. Enter the User Name and Organization.
4. Enter the Computer Name for the client.
5. Enter the Administrator’s Account Password (optional).
6. When prompted, press Finish to reboot the client.
7. Log in when prompted.
8. Open the Control Panel and run the MicroTouch screen calibration.
Completing the OS Installation (Windows 98)
The system automatically reboots when the image recovery is complete
and starts the software installation. This installation also installs most
of the additional software and drivers that are included in the disk
image. Complete the installation as follows.
1. When the terminal boots it enters the Windows setup routine.
2. At the User Information screen, enter the User information. This
can be done using a keyboard or you can use the touch screen
keyboard. After entering the information, press Enter or touch OK.
3. Open Control Panel and set the terminal Date and Time.
4. In the Control Panel, run the MicroTouch screen calibration (if
touch-screen equipped).