manualshive.com logo in svg

NCR 7454, Руководство пользователя, Страница: 143 / 244

Поделиться
Скачать
NCR 7454 Скачать руководство пользователя страница 143

Chapter 3: Setup 3-51

Default Primary Video Adapter

This selects the type of video card used for the boot display device.
1.

 

Move the cursor to the 

Default Primary Video Adapter

 option.

2.

 

Press Enter and then select the desired setting from the drop-down
menu.

PCI

 – use installed PCI card for the boot display device

•

 

AGP

 – use installed AGP card for the boot display device

PCI/PNP UMB Resource Exclusion

This option reserves specific upper memory blocks for use by legacy
ISA devices.
1.

 

Move the cursor to the 

PCI/PNP UMB Resource Exclusion

 option and

press Enter.

2.

 

Move the cursor to select the desired upper memory blocks.

3.

 

Press Enter and select the desired setting from the drop-down
menu.

•

 

Available

 – permits the selected upper memory blocks to be

used by devices other than a legacy device

•

 

Reserved

 – reserves the selected upper memory block for use

by a legacy device

PCI

AGP

Available

Reserved

Содержание 7454





















































































































































































































































Отзывы:

Нет отзывов