manualshive.com logo in svg

NCR 7454, Руководство пользователя, Страница: 139 / 244

Поделиться
Скачать
NCR 7454 Скачать руководство пользователя страница 139

Chapter 3: Setup 3-47

Other

DOS

Beep Error Codes

The 

Beep Error Codes 

option enables/disables beep codes on error(s).

Move the cursor to 

Beep Error Codes

, press Enter, and select On or Off.

Large Disk Access

1.

 

Move the cursor to the 

Large Disk Access

 option.

2.

 

Press Enter and then select the desired setting from the drop-down
menu.

•

 

Select 

DOS

 for Windows NT O/S.

•

 

Select 

Other

 if you are using UNIX, Novell NetWare, or other

type of operating system.

Note: 

Only the Windows NT Operating System is supported.

Local Bus IDE Adapter

This option is used to enable/disable the integrated local bus IDE
device to keep the system awake.
1.

 

Move the cursor to the 

Local Bus IDE adapter

 option.

2.

 

Press Enter and then select the desired setting from the drop-down
menu.

Disabled
Enabled
Secondary

Both

Содержание 7454





















































































































































































































































Отзывы:

Нет отзывов