NCR 7358-K708, Инструкции к набору

Страница: 8 / 36

Color Skin Upgrade (Walmart Medium Gray) 5
2. Remove the components to be replaced.
# Components Related Task/Information
a. Plastic Door Fascia Removing Plastic Door Fascia on page 15 .
b. Core Hood Removing Core Hood on page 16 .
c. Rear Panel Removing Rear Panel on page 17 .
d. Side Panels Removing Side Panels on page 18 .
3. Install the new components.
# Components Related Task/Information
a. Side Panels Removing Side Panels on page 18 .
b. Rear Panel Removing Rear Panel on page 17 .
c. Core Hood Removing Core Hood on page 16 .
d. Plastic Door Fascia Removing Plastic Door Fascia on page 15 .
4. Install the components that were set aside. For more information, refer to the table
below.
Note: Depending on the SelfServ Checkout configuration, some of these
components may or may not exist.
# Components Related Task/Information
a. Cosmetic Door
Bumper
Installing Cosmetic Door Bumper on page 28 .
b. Tri–Light/Lane
Light Pole and
Assembly
Do the following:
•
Installing Tri–Light/Lane Light Pole on page 29 .
• Installing Tri–Light/Lane Light Assembly on page 31 .
c. Basket Shelf For more information, refer to NCR FastLane SelfServ™
Checkout (7358) R6L Plus Hardware Installation Guide (BCC5-
0000-5263)
.
d. Coupon Printer
Shelf
e. Bagwell Depending on Bagwell configuration, refer to 7358-
K111/K112/K113 Bagwell Upgrade Kit Instructions.
5. Depending on the SelfServ Checkout configuration, fasten the hole label covers to all
unused screw holes on the side and rear panels.
Note: A sheet of hole label covers contains forty (40) hole label covers.