26
Color Skin Upgrade (Walmart Medium Gray)
Installing Core Cabinet Bumpers
To install the bumpers on the Core Cabinet, follow these steps:
1. Install the Side Core Bumper by doing the following:
Note:
For a No-Bag configuration, a Side Core Bumper is installed on each side of
the SelfServ Checkout. For configurations with bagging options, only one Side Core
Bumper is installed depending on the orientation of the SelfServ Checkout unit. For
the purpose of illustration only, this procedure shows images using a Left-hand (LH)
orientation unit.
a. Insert a bumper spacer into each hole.
b. Align the Side Core Lower Bumper holes with the corresponding bumper spacer
and then secure using two ¼–20 flat head screws, as shown in the image below.
