![NCR 7194 Скачать руководство пользователя страница 35](http://html1.mh-extra.com/html/ncr/7194/7194_service-manual_3743340035.webp)
Chapter 2: Diagnostics and Configuration
2-19
Note:
Data Scope Mode is usually considered a Level 1 diagnostic
test.
Data Scope Mode is enabled and disabled by selecting the “Diagnostic
Modes” sub-menu of the Configuration Menu.
Caution:
Be extremely careful changing any of the printer settings to
avoid inadvertently changing other settings that might affect the
performance of the printer.
Press the Paper Feed Button as instructed on the “Diagnostic Modes
Menu” to enable or disable the Data Scope Mode test.
•
Off, Normal Mode (Data Scope Mode disabled): 1 click
•
Data Scope Mode (enabled): 2 clicks
•
Receipt Test Mode:
3 clicks
Note:
Press the Paper Feed Button for at least one second to validate
the selection.
To run the Data Scope Mode:
1.
After you have enabled the Data Scope, exit the Configuration
Menu.
2.
Run a transaction from the host computer.
All commands and data sent from the host computer will be printed as
hexadecimal characters as shown in the illustration.
To exit the Data Scope Mode:
1.
Enter the Configuration Menu again.
See “Configuring the Printer.”
2.
Disable the Data Scope Mode.