Service Guide
i
Preface
Important Information to the User
In order to ensure compliance with the Product Safety, FCC and CE
marking requirements, you must use the power supply, power cord,
and interface cable, which were shipped with this product or which
meet the following parameters:
Power Supply
UL Listed (QQGQ), Class 2 power supply with SELV (Secondary Extra
Low Voltage), non-energy hazard output, limited energy source, input
rated 100-240 Vac, 1.5/0.8 A, 50/60 Hz, output rated 24 Vdc, 2.3 A.
Use of this product with a power supply other than the NCR power
supply will require you to test this power supply and NCR printer for
FCC and CE mark certification.
Interface Cable
A shielded (360 degree) interface cable must be used with this product.
The shield must be connected to the frame or earth ground connection
or earth ground reference at EACH end of the cable.
Use of a cable other than described here will require that you test this
cable with the NCR printer and your system for FCC and CE mark
certification.
Power Cord
A UL listed, detachable power cord must be used for this product. For
applications where the power supply module may be mounted on the
floor, a power cord with Type SJT marking must be used. For
applications outside the US, power cords, which meet the particular
country’s certification and application requirements, should be used.
Use of a power cord other than described here may result in a violation
of safety certifications, which are in force in the country of use.
