background image

Chapter 3: Ordering Paper and Supplies

7156 Setup and User’s Guide

September 1998

28

Ordering Forms

The 7156 prints on single- or multiple-part forms in the slip station (up to five-part
forms). Forms and slips must meet the following requirements:

 

Front insertion (minimum):
51 mm (2.0 inches) wide
70 mm (2.75 inches) long

 

Side insertion (minimum):
203 mm (8.0 inches) wide
51 mm (2.0 inches) long

 

Single-ply forms should be on paper that is greater than 15 pounds

 

Multiple-part forms (up to five parts) should be no thicker than .406 mm
(.016 inches)

To order forms, contact your sales representative or order from NCR at the
following address or toll free number:

NCR
Media Products Division
9995 Washington Church Road
Miamisburg, OH  45342
Voice: 1(800)543-8130 (toll free), or local listing of Media Products sales office

Ordering Ribbon Cassettes

To order ribbon cassettes, contact your sales representative or order from NCR at
the following address or toll free number:

NCR
Media Products Division
9995 Washington Church Road
Miamisburg, OH  45342
Voice: 1(800)543-8130 (toll free), or local listing of Media Products sales office

Stock Numbers:

198161 (purple ribbon cassette—3 million characters)
198145 (black ribbon cassette—3 million characters)

Содержание 7156







































Отзывы: