NCR 5968-K154, Инструкции к набору

Страница: 8 / 10

6 Capacitive Biometric Reader
Cleaning and Using the Biometrics Reader
Sensor Cleaning Procedures
Daily Cleaning
Before each authentication, it is recommended that the user first clean the sensor. Place
adhesive tape onto the sensor and then pull it off. This assures that residue from
previous usage is removed.
Caution: Do not use abrasive materials to clean the sensor, including paper products.
Only adhesive tape should be used.
Using the Biometrics Reader
Place thumb/finger flat and straight on the sensor. If this is not possible, try to place
thumb/finger on the sensor in the same angle every time.
Under normal usage conditions dirt, residue, oils, and other materials can collect on
users’ fingers. This can possibly cause poor collection of fingerprint data, which can
cause performance degradation. For the best results, it is recommended that the user
keeps their fingers relatively clean and free of residues that may alter the sensor
performance.
Scotch tape can be used to clean fingers. Adhere the tape to the finger and then pull it
off.