NCR 5964, Руководство пользователя

Страница: 31 / 57

Chapter 4: Calibrating the Touch Screen 4-9
3M MicroTouch Calibration Procedures
Touch Screen Calibration
Observe for the following Touch Screen calibration guidelines:
•
Calibrate the touch screen as part of the initial installation.
•
Recalibrate whenever the terminal is moved to a new location.
•
Recalibrate after replacing any component in the terminal.
•
Recalibrate whenever a customer reports a touch screen problem.
•
Recalibrate if you switch to a new screen resolution
Use the TouchWare utilities to perform the following procedures:
•
2 ‐ Point Calibration
•
Cursor Stabilization
•
25 ‐ Point Linearization
•
Restore Defaults Procedure
The TouchWare utilities are available on the NCR Gold Drives for
WinNT, Win2K, WinXP Pro and WinXPe.
Application software can possibly generate a dialog box from the
Touch Driver, with the message that the touch screen needs to be
recalibrated. If the screen appears to be working normally, then this
message can be ignored. There will be a check box labeled
Do not
show this message again
. Make sure this box is checked.