NCR 5932, Руководство пользователя

Страница: 29 / 80

Chapter 2: Installation 2-5
Installing the Keyboard
Caution:
The power supply cord is used as the main disconnect
device. Ensure that the socket outlet is located/installed near the
equipment and is easily accessible.
Le cordon d’alimentation est utilisé comme interrupteur général. La
prise de courant doit être située ou installée a proximite du matériel et
être facile d’accés.
Installation Goal
The goal for installing the keyboards is for a reasonably trained
operator or store manager to fully install the workstation in less than
10 minutes.
To qualify as “reasonably trained” an installer or store manager must
be fluent with the terminology and basic technology of PC hardware
and software. This level of knowledge can typically be found in an
individual who has installed several PC systems, and who routinely
uses a PC for personal or business computing.
Cable Connections
The keyboard communicates with the host system via a single USB
compatible interface. They keyboard cable is a USB 1.1 compliant cable.
The mating connector to the host is a UBS Series “A” plug and the
keyboard side of the cable is enclosed with sufficient strain relief. The
keyboard conforms to all operational and non-operational vibration
and shock requirements.
The length of the cable from the keyboard cabinet to the end of the
connector is 70.1+ 0.5 inches. One end of the cable is to be internally
connected but not soldered and clamped to the printed circuit board of
the keyboard.