Installation
We suggest that our products be installed by professionals
that are locally licensed by the authority having
jurisdiction in gas piping.
6)
Parts List
1)
Burner (1)
2)
Pan (1)
3)
Key Valve (1)
4)
Properly Sized Orifice for Natural Gas or LP (1)
5)
Coupler- (2)
6)
Close Nipple (1)
7)
Flex Line (2)
8)
Flare Fittings (4)
9)
Elbow (1)
10)
Lava Rock (1)
11)
Instructions (1)
7)
Fire Pit Burner Assembly
1)
Ensure gas to the fire pit location is shut off.
2)
Remove parts from packaging material.
3)
Read Instructions thoroughly.
4)
Call distributor for clarification as needed.
5)
Inspect the Burner for any signs of damage or corrosion.
6)
Apply pipe dope or gas rated tape to all threads.
7)
Connect flex line from valve to burner- see Steps 8 & 9.
LP Gas Burner Assembly
8)
LP burner assembly sequence.
Note: Must use the LP Orifice
Burner >Pan > Close Nipple > Coupler > Air-Mixer >
Coupler > Fitting > Flex Line
Air Mixer
Natural Gas & LP Gas Configuration
WARNING
: Confirm “Gas In” is towards control valve or shutoff valve. Installing backwards will result in severe gas leak and
risk of explosion. If your air-mixer has an adjustment nut adjust to desired flame condition.
WARNING:
A pan must be used on LP systems and configured in way to minimize fuel settling below the pan. Failure to do so
may result in personal injury or explosion.
Natural Gas Burner Assembly
9)
Natural Gas burner assembly sequence.
Burner > Pan > Close Nipple > Coupler > Orifice > Coupler > Fitting > Flex Line
