Device Characteristics
Voltage Requirements:
10
‐
15VDC Regulated or Automotive Supply Recommended
UNREGULATED WALL ADAPTERS SHOULD NOT BE USED WITH
THIS DEVICE.
Amperage Requirements:
300MA Absolute MAX
Power Connector type:
2.1mm
Center
Positive
Power Supply:
PWR12
(www.iorelay.com)
Power Cable:
CP
‐
2185
‐
ND (www.digikey.com)
CP
‐
2189
‐
ND (www.digikey.com)
Power Connector:
SC1052
‐
ND (www.digikey.com)
Input Ratings:
The inputs of the ZigBee Mirror Module were designed to ac
‐
cept contact closures ONLY. Voltages should not be applied to
the inputs. All inputs are pulled up to 5VDC using a 1K Resis
‐
tor. All inputs share a single common ground.
Input Compatibility:
Switches
Push Buttons
Magnetic Reed Switches
Mechanical Relays
Motion Detectors (if equipped with contact closure outputs)
Any other device that can connect 2 wires together
Transmission Range:
Up to 300 Feet using XBee Module.
Up to 1 Mile using XBee Pro module and Rooftop Antenna.
Communication range will vary greatly and is very difficult to
predict. For best results, choose a controller with an external
antenna. This allows for positioning the antenna for better
communication. The most popular ZigBee choice is the XBee
Pro Module with the External Antenna (this is the most expen
‐
sive option when ordering). This device offers the best possi
‐
ble range and flexibility if you determine an outdoor antenna
may be required.
Enclosures:
ZigBee Mirror Modules were not profiled for use with a specific
enclosure. Many enclosures are available from
www.digikey.com and www.mouser.com that could work with
some minor drilling. We do not recommend any particular
part number. Users should review enclosure types carefully.
Metal enclosures should not be used unless you have chosen
the External Antenna Option and you plan to mount the an
‐
tenna outside the enclosure.
Operating/Storage Temperature:
‐
40 to +125° C
Note: Temperature ratings are based on Ratings provided to us
by the manufacturer of the components used in our products.
This rating represents the most temperature sensitive compo
‐
nent used. We do not do any form of environmental testing to
verify manufacturer ratings.
Country of Origin:
This device was designed and manufactured in the United
States of America using components from many countries.
FCC/UL Approvals:
NCD Implements communication technologies from
www.digi.com. ZigBee communication devices are UL/FCC
approved for use in the United States and Europe. Agency ap
‐
provals may not be available in all countries. Details on agency
approvals are available from www.digi.com. It is the policy of
National Control Devices to assist customers in UL/FCC compli
‐
ance in any way necessary, including design modifications, if
required, to meet UL/FCC compliance. NCD does not directly
obtain approval from these agencies as product volumes are
too low to be practical for all NCD devices. To date, many NCD
devices have met these approvals without design modifica
‐
tions, when installed in a proper enclosure that meets certifica
‐
tion requirements. Electrically, no design changes have ever
been required to meet these certifications.
Technical Support:
Please
contact National Control Devices
if you are seeking
technical support for this or other devices.
