NCD NC200, Руководство по установке

Страница: 6 / 18

Floppy Disk Drive Installation
2 Floppy Disk Drive Installation
System Requirements
To connect the floppy drive to your NC, you must have a Parallel Port installed.
If you do not have a Parallel Port installed, contact your NCD distributor or
sales representative. In addition, your NC must be operating with NCBridge
Software Version 3.2 or later.
Connecting the Drive
1. Connect the drive to the NC’s parallel port. Refer to the drawing in Figure 1.
Look at the plugs on the interconnect cable. The plug that has pins connects
to the NC; the plug that has holes connects to the floppy drive.
2. Connect the power supply to the floppy drive as shown.
Now you are ready to make the connection to the network described on page 4.