6
INSTALLATION GUIDE
Using the appliance for the first time:
1.
Read the instruction manual and retain for future reference.
2.
Remove all packaging, use a soft dry cloth to clean all the parts then re-assemble parts
back together.
Installation Procedure:
1. Press the button on side panel of the body
and use anther hand to pull up the cover to
open the cover.
2. Remove the package of the NCCO reactor
as well which is place on top inside the
giftbox.
3. Take out the HEPA Filter and remove the
package.
4. Place the HEPA filter to the NCCO reactor
to make it as filter set.
5. Install the filter set to the machine body.
Press it down firmly.
*Make sure the filter set fits the machine
body well.
6. Resume the cover to its original position
by press it down till a snap sound heard.
Connect to power supply and press on/off
button to switch on the unit.
Using Method (in vehicle)
A) Position the appliance on any dry and flat surface inside the vehicle.
1. Make sure power supply is disconnected before lifting up/move the appliance.
2. Plug the power cord’s DC plug to the appliance’s DC socket.
3. Place the appliance on a flat surface inside the car.
4. Connect the other end of the power cord with the car plug and
connect to the smoke lighter socket. Installation finished.
① ② ③
④ ⑤ ⑥
