9
2.7.
HEPA FILTER REPLACEMENT TIMER SETTING
Default HEPA Filter replacement time is 3,000 hours.
HEPA Filter Replacement Time Reminding: When the countdown timer has reached less than 100
hours, there is a reminding of Filter replacement where under the Power-On state, “HP” displays at
control panel once every 5 seconds and the “Beep Beep” sound will be heard from unit for 10 seconds.
The blower will operate normally during the time reminding. After replacing Filter, connect with power
supply but do not turn on unit. Then, long press the ON / OFF Indicator
for 10 seconds and the
clicking sound will be heard from unit. Next, press the Air Speed Reduce Indicator
, and “HF” will
display at the control panel. Unit automatically turns off after 5 seconds where the reminding of HEPA
Filter Replacement will stop.
2.8.
NCCO REACTOR CHECKING TIMER SETTING
Default NCCO Reactor checking time is 11,000 hours.
Time Reminding of NCCO Reactor Checking: When the countdown timer has reached less than 100
hours, there is a reminding of Reactor check where under the Power-On state, “nC” displays at control
panel once every 5 seconds and the “Beep Beep” sound will be heard from unit for 10 seconds. The
blower will operate normally during the time reminding. After checking Reactor, connect with power
supply but do not turn on unit. Then, long press the ON / OFF Indicator
for 10 seconds and the
clicking sound will be heard from unit. Next, press the Air Speed Increase Indicator
, and “nF” will
display at the control panel. Unit automatically turns off after 5 seconds where the time reminding of
NCCO Reactor Checking will stop.
2.9.
POWER DOWN MEMEORY FUNCTION
When unit is running, if user presses the ON / OFF Indicator, ON / OFF Button or uses the wire
controller to turn off unit, and presses them again to turn on unit, the unit will return to the operation
mode before Power Off.
When unit is running, if user deliberately disconnects power supply and connects power supply later on,
the unit will be Auto Power On and return to the operation mode before power down (if the unit has
been turned off before user deliberately disconnects power supply, and it is reconnected with power
supply later on, the unit will be Auto Power On and return to the operation mode before Power Off).
