NC ENGINEERING MKII 600 Series, Инструкция по эксплуатации, техническому обслуживанию и безопасности, Страница: 14 / 80

14
SAFETY INFORMATION
THESE INSTRUCTIONS MUST BE READ BEFORE OPERATING
THE MACHINE
IF YOU SELL OR HIRE THIS TRAILER ENSURE THIS MANUAL GOES
WITH THE TRAILER.
In this manual the words DANGER, WARNING and CAUTION are used to highlight hazards.
DANGER identifies the most serious hazards and other words are also used. Each word is
defined as follows: ‐
DANGER ‐ A cause or likely cause of harm or injury.
WARNING ‐ A statement to warn of something.
CAUTION ‐ Take care to avoid danger or mistakes.
NEVER – At no time; not ever.
ALWAYS – At all times; on all occasions.
AVOID – Keep away from or stop oneself from doing.
This Safety alert symbol is used in this manual to highlight information about
potential safety concerns. If will be positioned beside hazard warnings to draw
the Operator’s attention to hazards associated with particular procedures.
The following safety information must be followed to avoid causing injury to yourself or
others: ‐

NEVER work under an un ‐ propped body. When using the prop, the trailer must
always be unladen.

NEVER allow children into the area when operating the trailer.

NEVER carry passengers.

NEVER leave the trailer unattended while the tractor is running.

NEVER load trailer beyond its specified capacity.

NEVER tip trailer across a slope.

NEVER tip trailer when there are high crosswinds.

NEVER drive with the body in the raised position.

NEVER put hands near a leaking hydraulic pipe.
THESE SAFETY PRECUATIONS MUST BE
OBSERVED
Failure to do so could result in serious
injury or death.