4
A27WA
ARMREST
ASSEMBLY INSTRUCTIONS
PART QTY
1.
Arms (1L & 1R) . . . . . . . . . . . . . . . 2
2.
Arm Screws . . . . . . . . . . . . . . . . . . 8
3.
Seat Cushion . . . . . . . . . . . . . . . . . 1
4.
Allen Wrench . . . . . . . . . . . . . . . . . 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Align holes in the Arms (1L & 1R) with holes in the Seat Cushion (3), attach Arms (1L & 1R) to Seat Cushion (3) using three Arm Screws (2) for each
Arm (1).
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (4).
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
2
NBF ® Signature Series December 2015
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
PART QTY
1.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Casters . . . . . . . . . . . . . . . . . . . . . 5
3.
Pneumatic Cylinder . . . . . . . . . . . . 1
4.
Seat Cushion w/ Seat Plate . . . . . . 1
5.
Back Assembly . . . . . . . . . . . . . . . 1
6.
Footring . . . . . . . . . . . . . . . . . . . . . 1
7.
Knobs . . . . . . . . . . . . . . . . . . . . . . 2
8.
Screws . . . . . . . . . . . . . . . . . . . . . . 4
9.
Back Support (Pre-Installed) . . . . . 1
10.
Allen Wrench . . . . . . . . . . . . . . . . 1
1
1
X4
2
3
1
6
3
6
5
8
9
10
X5
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
STEP 2
Slide Pneumatic Cylinder (3) through Footring (6) and into Base (1).
STEP 3
Secure Footring (6) to Pneumatic Cylinder (3) using two Knobs (7).
FULLY TIGHTEN KNOBS (7).
STEP 4
Attach Back Support (9) to rear of Seat Cushion w/ Seat Plate (4) using four Screws (8),
FULLY TIGHTEN ALL SCREWS (8) USING ALLEN WRENCH (10).
STEP 5
Place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
X2
3
7
4
15-MM3T1A720D
VERTICAL MESH BACK DRAFTING CHAIR w/ FOOTRING
ASSEMBLY INSTRUCTIONS
2
1L
1R
3
STEP 1
