NBE BTR Series, Руководство по эксплуатации и обслуживанию

Страница: 13 / 28

BTR-S
ERIES
O
PERATION
& M
AINTENANCE
M
ANUAL
12838 Stainless Drive, Holland, MI 49424 Phone: 616/399-5600 Fax 616/399-3084

Copyright 2018 BRAWN Mixer www.BRAWNMIXER.com Page 8 of 9
11/27/2018
TABLE 3: RECOMMENDED LUBRICANTS
Ambient
Temperature (F)
Formulation
Oil
Manufacturer
Oil Brand Name
20° to 104° Mineral Texaco Meropa 220
20° to 104° Mineral Shell Omala EP 220
Ambient
Temperature (F)
Formulation
Oil
Manufacturer
Oil Brand Name
14° to 176° Synthetic Texaco Pinnacle EP680
14° to 176° Synthetic Shell Omala HD 680
-13° to 140° Synthetic Texaco Pinnacle EP220
-13° to 140° Synthetic Shell Omala HD 220
-40° to 50° Synthetic Texaco Pinnacle EP32
-40° to 50° Synthetic Shell Omala HD 32
20° to 104° Food Grade Chevron FM ISO 220
20° to 104° Synthetic Food Grade OilJAX Magnaplate 85W140-FG
5° to 125° Fluid Grease Mobil Mobilux EP023
-30° to 140° Synthetic Fluid Grease Mobil Mobilith SHC 007
-30° to 140° Synthetic Fluid Grease Shell Tivela Compound A
Ambient
Temperature (F)
Formulation
Grease
Manufacturer
Grease Brand Name
-20° to 140° Mineral Texaco Multifak EP2
-20° to 140° Mineral Shell Cypernia RA/C3
Ambient
Temperature (F)
Formulation
Grease
Manufacturer
Grease Brand Name
-58° to 230° Synthetic Texaco Starfak 2202
-58° to 230° Synthetic Shell Aero Shell
5° to 230° Food Grade Lubriplate SIF 1
STANDARD OIL - ISO VG220
OPTIONAL LUBRICANTS
STANDARD BREARING GREASE - NL GI 2EP lithium
OPTIONAL BEARING GREASE
STORAGE
Units shipped from Brawn Mixer are intended to be used within 30 days after receipt and presumed to be stored indoors in
a heated building. Store mixers as packaged by the factory. If you intend storing units under adverse conditions or for a
long period of time, special storage precautions will be necessary.
1. Store in a sheltered area away from chemical vapors or steam.
2. Cover.
3. Do not store in sunlight or near high heat.
4. Spray oil on exposed shafts and seals. Remove oil on start-up.
5. Rotate output shaft 360º every 3-4 weeks.
6. Mixers should not be stored near vibrating machinery to avoid damage to the bearings.
7. If electric motors have been subjected to humid conditions, check the insulation resistance between phase and mass
and between the different phases. The resistance should not be less than 100 megohms. If the resistance is less,
please consult the facto