NBE BRAWN MIXER BTR 1 Series, Руководство по эксплуатации и обслуживанию

Страница: 18 / 32

BIM 1009/2007/09 Page 2 of 8 www.nord.com
Couplings for the NEMA and IEC Adapters
Depending on the size of the input adapter to the gearbox, NORD Gear supplies two styles of couplings - BoWex
“
(gear tooth) and Rotex
“
(jaw) couplings.
BoWex
“
Couplings
NORD C-face adapter input shafts have a machined spline on the end. NORD incorporates two styles of BoWex
“
couplings, the “J” and “M”
styles. The “J” style is a one-piece coupling with a metal hub and nylon spline. The “M” style is a two-piece coupling – the metal hub and a
nylon sleeve. Nylon and steel components allow them to operate in high ambient temperatures without lubrication or maintenance.
x
Nylon sleeves resist dirt, moisture, most chemicals and petroleum products
x
No lubrication required
x
Operating Conditions: -22
q
F - 195
q
F (-30
q
C - 90
q
C)
x
Higher temperature coupling sleeve available up to 250
q
F (120
q
C)
x
Special bore available
BoWex
“
Mechanical Ratings
“J” Style “M” Style
Coupling
Type
Available
Bore Sizes
Cont. / Peak
Torque
Input
Coupling
Type
Available
Bore Sizes
Cont. / Peak
Torque
Input
J14
11, 14 mm
5/8 in.
10 / 20 Nm
89 / 177 lb-in
IEC 63, 71
NEMA 56C
M14/M24/M28
Same as
“J” style
Same as
“J” style
Same as
“J” style
J24
19, 24 mm
5/8, 7/8 in
20 / 40 Nm
177 / 354 lb-in
IEC 80, 90
NEMA 56C,140TC
M38
38 mm
1-1/8, 1-3/8 in.
80 / 160 Nm
708 / 1,416 lb-in
IEC 132
NEMA 180TC,
210TC
J28
28mm
1-1/8 in
45 / 90 Nm
399 / 797 lb-in
IEC 100, 112
NEMA 180TC
M42
42 mm
1-5/8 in
100 / 200 Nm
885 / 1,770 lb-in
IEC 160
NEMA 250TC
M48
48 mm
1-7/8 in
140 / 280 Nm
1240 / 2,478 lb-in
IEC 180
NEMA 280TC
Rotex
“
Couplings
The cast iron jaw type couplings have an integral urethane “spider” that
provides smooth transmission of the motor torque. A set screw on the
coupling prohibits axial movement along the motor shaft.
x
Excellent shock and vibration dampening
x
Excellent resistance to oils and most chemicals
x
No metal-to-metal contact
x
Operating Conditions: -40
q
F - 195
q
F (-40
q
C - 90
q
C)
x
Higher temperature material (Hytrel) spider available up to 230
q
F
(110
q
C)
x
Special bores available
Hub Design 1 Spider Hub Design 1a
Rotex
“
Mechanical Ratings
Coupling
Type
Available
Bore Sizes
Continuous / Peak
Torque
Inputs Used With
Spider
R19 14, 19 mm
17 / 34 Nm
150 / 300 lb-in
SEK/SEP 100
R24 19, 24 mm
60 / 120 Nm
530 / 1,060 lb-in
SEK/SEP 100, 130
Urethane
98 Shore A Hardness
Color: Red
R28 32, 38 mm
95 / 190 Nm
840 / 1,680 lb-in
SEK/SEP 165, 215
R38
1.89” (48mm)
Max Bore
190 / 382 Nm
1,680 / 3,380 lb-in
-
R42
2.44” (62mm)
Max Bore
310 / 620 Nm
2,740 / 5,480 lb-in
-
R48
42, 48 mm
1-5/8, 1-7/8 in
310 / 620 Nm
2,740 / 5,485 lb-in
IEC 160, 180
NEMA 250T, 280T
SEK/SEP 300, 215
R65
60 mm
2-1/8, 2-3/8 in
625 / 1,250 Nm
5,530 / 11,060 lb-in
IEC 225
NEMA 320T, 360T
R90
65, 75, 80 mm
2-1/8, 2-3/8 in
2,400 / 4,800 Nm
21,240 / 42,480 lb-in
IEC 250, 280, 315
NEMA 360T, 400TS, 440TS
Urethane
92 Shore A Hardness
Color: Yellow