Focus on R&D Stable and reliable
7
◆
After the setting software is opened, select the corresponding serial port number, and
then click to open the port, the software interface becomes editable condition.
◆
Turn on the handheld at this time (if it is already turned on, simply turn it off, and then
turn it on again). After the handheld is turned on, "connection successful" appears in the
software information bar, indicating that the connection is successful.
◆
After the handset is successfully connected, it will automatically obtain the parameter
information currently set. Modify the parameters according to the needs.
◆
After that, click “SET” to complete the setting operation.
7.2 Fixed channel setting
◆
The fixed channel parameter corresponds to the channel setting of the handheld.
Only handheld or repeaters under the same channel can communicate with each other.
7.3 Communication password
◆
Under the same channel, the communication password is required to be the same.
Under the same channel but with different communication passwords, you cannot
communicate with each other. Modifying the communication password of all handhelds
and repeaters for communication. This function is often used to prevent eavesdropping
with same frequency
7.4 Networking mode
◆
Fixed channel and roaming switching mode are optional as networking mode. For
specific function descriptions, please refer to the handheld network mode setting.
8.Maintenance and Cleaning
◆
In order to ensure the good performance of this device and prolong its service life,
please be familiar with the following contents for better maintenance and cleaning.
8.1 Maintenance
◆
Do not puncture or scratch the device with hard objects.
◆
Do not store the device in an environment that contains corrosive electronic circuits.
8.2 Cleaning
◆
Please clean the device regularly, and use a clean and dry towel or brush to remove
the dust on the surface of the equipment.
