Naxer
Tech
Limited
10 |
P a g e
Format
%ODO,x
%ODO,x
When the unit receives the command, it will set/ reset its odometer to x value
(where x is a
numeric value)
and will send confirmation to the number which sent the command in SMS text
format or GPRS. In below example ODO is set to zero metres.
Example
%ODO,0
Format
%BATCUT,0
%BATCUT,0
When the unit receives the command, it will send an alert once only to the authorized number
if it detects disconnection with the main battery.
Example
-
Format
%BATCUT,1
%BATCUT,1
When the unit receives the command, it will send alert continuously to the authorized number
if it detects disconnection with the main battery.
Example
-
Note:
In AUTOARM mode NTT will automatically Arm itself when the IGN is off and Input -3 is active. It will DisArm itself when Input-3 is
inactive.
Input-3 must be connected to the vehicle’s central locking signal which is going to doors. This provides very high security for the
vehicle as the Engine will be killed when drivers locks the vehicle.
In this mode if any intruder somehow opens the door, Alarm will be generated. He will not be able to start the vehicle and if he
tries to tow the vehicle, alarm will be generated.
