Naxa NX-556, Инструкция по эксплуатации

Страница: 14 / 56

11
Audio Mode
You can select the type of sound which best corresponds to your listening requirements by selecting Sound
in SOUND menu. You may select the sound mode directly by pressing the SMODE button on the remote
control.
Balance
Press button and then use to adjust the audio output between left and right speakers.
Bass
Press button and then use increase or decrease the level of the lower-pitched sounds.
Treble
Press button and then use to increase or decrease the level of the higher-pitched sounds
Spdif Type
Press to select the one of mode of the digital audio output such as PCM and Dolby digital or off.
Tuner Mode
You can select the signal input mode: Antenna, Cable.
Channel Scan
Select “Channel Scan”, press ENTER button to start the channel scan. Press
LCD-MENU
to stop or it
will not stop untill the scan is finished.
Audio menu options
Press the MENU on the front panel or LCD-MENU on the remote control and then use to select the
AUDIO menu, press or ENTER button to enter it(see the picture below).
1. Use to select what you want to adjust in the
Audio menu.
2. Press
ENTER
or / button to adjust(according to
the hint below).
3. When you are satisfied with your adjustment, press
LCD-MENU. .
TV menu options
Press the MENU on the front panel or LCD-MENU on the remote control and then use to select the
TV menu, press or ENTER button to enter it(see the picture below).
1. Use to select what you want to adjust in the TV
menu.
2. Press ENTER or / button to adjust(according to
the hint below).
3. When you are satisfied with your adjustment, press
LCD-MENU.
.
a n n e t n A e d o M r e n u T
Channel Scan
Channel Skip
ENTER MENU
Scan Select Back
MENU
Select Exit
a n n e t n A e d o M r e n u T
Channel Scan
Channel Skip
TV
MENU
Select Exit
Balance
Bass
Treble
Sound mode Concert
SPDIF type PCM 0
50
50
Audio